Toward a universal quantum QSPR operator

This article presents a discussion about the formalism, which might be associated to a general Quantum quantitative structure–properties relations operator, appearing in a Boltzmann‐like exponential form, which is based in turn on the definition of the concept of thermal voltage, applied to thermally scaled electronic density functions. Three practical numerical examples are presented, corresponding to the calculation of the polarization angle in assorted chiral molecules, the estimation of fish toxicity for perchlorobenzene within the set of chlorobenzenes and a typical quantum QSAR study on the popular Cramer steroid set.     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

Compressive advection and multi‐component methods for interface‐capturing

This paper develops methods for interface‐capturing in multiphase flows. The main novelties of these methods are as follows: (a) multi‐component modelling that embeds interface structures into the continuity equation; (b) a new family of triangle/tetrahedron finite elements, in particular, the P₁DG‐P₂(linear discontinuous between elements velocity and quadratic continuous pressure); (c) an interface‐capturing scheme based on compressive control volume advection methods and high‐order finite element interpolation methods; (d) a time stepping method that allows use of relatively large time step sizes; and (e) application of anisotropic mesh adaptivity to focus the numerical resolution around the interfaces and other areas of important dynamics. This modelling approach is applied to a series of pure advection problems with interfaces as well as to the simulation of the standard computational fluid dynamics benchmark test cases of a collapsing water column under gravitational forces (in two and three dimensions) and sloshing water in a tank. Two more test cases are undertaken in order to demonstrate the many‐material and compressibility modelling capabilities of the approach. Numerical simulations are performed on coarse unstructured meshes to demonstrate the potential of the methods described here to capture complex dynamics in multiphase flows. Copyright © 2015 John Wiley & Sons, Ltd.     

Exact Solution of a(2+1)-Dimensional Anisotropic Star in Finch and Skea Spacetime

We provide a new class of interior solution of a(2+1)-dimensional anisotropic star in Finch and Skea spacetime corresponding to the BTZ black hole. We develop the model by considering the MIT bag model EOS and a particular ansatz for the metric function grrproposed by Finch and Skea [M.R. Finch and J.E.F. Skea, Class. Quantum.Grav. 6(1989) 467]. Our model is free from central singularity and satisfies all the physical requirements for the acceptability of the model.     

Dependence of dielectric,ferroelectric, and piezoelectric properties on crystalline properties of p(VDF‐co‐TrFE) copolymers

Thermal processing at various temperatures has been used to fabricate poly(vinylidene fluoride‐co‐trifluoroethylene) [P(VDF‐co‐TrFE)] films with varied crystalline properties in an attempt to improve their piezoelectric properties. Although the dielectric constant of the films annealed at higher temperature is smaller than that of cooled and quenched ones, it has been shown that the annealed films possess larger crystallinity and stacked lamellar crystal grain size. The ferroelectric domains deriving from crystal region in all the samples are effectively improved by hot polarization. As a result, the remnant polarizations (P_r) and coercive electric field (E_c) of the corresponding films are improved at a low frequency due to the response of dipoles in crystal phase, and the largest piezoelectric constant in the longitudinal thickness mode (d₃₃=?25 pC/N) is obtained in an annealed copolymer film. The results illustrate improving the crystal structure of P(VDF‐co‐TrFE) is an effective way to realize high electromechanical properties, which provides broadly applied scenery for this kind of copolymer in piezoelectric components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

On modifying properties of polymeric melts by nanoscopic particles

We study geometric and energetic factors that partake in modifying properties of polymeric melts via inserting well‐dispersed nanoscopic particles (NP). Model systems are cis‐1,4‐polybutadiene melts including a single atomic clusters of size varied in the range 10–150 atoms (3–7 Å in radius; 0.1–1.5% v/v). We modify the interactions between the chains and the particle by tuning attractive van der Waals interactions. Using molecular dynamics, we study equilibrium fluctuations and dynamical properties at the interface. The NPs move in the polymer matrix in two different regimes corresponding to trapped and free diffusion, depending on the NP size. Furthermore, degree of crowding around the NP by the polymer chains is quantified. Effect of NP size and interaction strength both on volume and volumetric fluctuations is manifested in mechanical properties, quantified here by bulk modulus, K. Tuning NP size and nonbonded interactions results in ～15% enhancement in K by addition of a maximum of 1.5% v/v NP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Methylol‐functional benzoxazines as precursors for high‐performance thermoset polymers: Unique simultaneous addition and condensation polymerization behavior

A new class of high‐performance resins of combined molecular structure of both traditional phenolics and benzoxazines has been developed. The monomers termed as methylol‐functional benzoxazines were synthesized through Mannich condensation reaction of methylol‐functional phenols and aromatic amines, including methylenedianiline (4,4′‐diaminodiphenylmethane) and oxydianiline (4,4′‐diaminodiphenyl ether), in the presence of paraformaldehyde. For comparison, other series of benzoxazine monomers were prepared from phenol, corresponding aromatic amines, and paraformaldehyde. The as‐synthesized monomers are characterized by their high purity as judged from ¹H NMR and Fourier transform infrared spectra. Differential scanning calorimetric thermograms of the novel monomers show two exothermic peaks associated with condensation reaction of methylol groups and ring‐opening polymerization of benzoxazines. The position of methylol group relative to benzoxazine structure plays a significant role in accelerating polymerization. Viscoelastic and thermogravimetric analyses of the crosslinked polymers reveal high T_g (274–343 °C) and excellent thermal stability when compared with the traditional polybenzoxazines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Shear modulus determination in model hydrogels by means of elongated magnetic nanoprobes

The mechanical characterization of complex soft matter by quasi-static magnetometry using nanoscopic magnetic probes is demonstrated for model hydrogels doped with two types of elongated magnetic nanoparticles. Chemically crosslinked poly(acrylamide) (PAAm) hydrogels serve as the matrix in which nickel nanorods or weakly magnetized hematite (α-Fe₂O₃) ellipsoids are embedded as local probes. We investigated the swelling behavior of the ferrogels in order to verify that their equilibrium swelling degree in water is not influenced by the probes, shows a good correlation with the Frenkel–Flory–Rehner model. The proposed magnetomechanical method relies on a correlation between the shear modulus of the PAAm hydrogel matrix and the coercive fields of the corresponding isotropic ferrogels. By extending the Stoner–Wohlfarth model for single-domain blocked magnetic particles by a term for particle rotation in an elastic matrix, information on the shear modulus of the matrix can be obtained. Comparison of the results with the expected relation from rubber elasticity theory illustrates both the general potential as well as the limits of the approach. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Improving charge transport in poly(3‐hexylthiophene) transistors via blending with an alkyl‐substituted phenylene–thiophene–thiophene–phenylene molecule

A prototypical semiconducting bicomponent system consisting of a conjugated polymer, that is, poly(3‐hexylthiophene) (P3HT), blended with a small thiophene containing conjugated molecule, that is, an alkyl‐substituted bisphenyl‐bithiophene [phenylene–thiophene–thiophene–phenylene (PTTP)], has been used as an electroactive active layer in field‐effect transistors (FETs). The self‐assembly of this bicomponent system at surfaces has been studied at different length scales, from the nanoscale to the macroscale, and compared with the behavior of monocomponent films of PTTP and P3HT. The correlation between morphology and electric properties of the semiconducting material is explored by fabricating prototypes of FETs varying the relative concentrations of the two‐component blend. The maximum charge carrier mobility value, achieved with a few percent of PTTP component, is not simply due to a uniform dispersion of the molecules in the polymer matrix, but rather to the generation of very long percolation paths, whose composition and electrical properties can be tuned with the PTTP concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Analysis of the anisotropy of group velocity error due to spatial finite difference schemes from the solution of the 2D linear Euler equations

Numerical differencing schemes are subject to dispersive and dissipative errors, which in one dimension, are functions of a wavenumber. When these schemes are applied in two or three dimensions, the errors become functions of both wavenumber and the direction of the wave. For the Euler equations, the direction of flow and flow velocity are also important. Spectral analysis was used to predict the error in magnitude and direction of the group velocity of vorticity–entropy and acoustic waves in the solution of the linearised Euler equations in a two‐dimensional Cartesian space. The anisotropy in these errors, for three schemes, were studied as a function of the wavenumber, wave direction, mean flow direction and mean flow Mach number. Numerical experiments were run to provide confirmation of the developed theory. Copyright © 2012 John Wiley & Sons, Ltd.